HP Photosmart R837 User Manual
Page 20
Date & Time Imprint (
only)—Imprints date in lower left corner of image.
The setting remains in effect until it is changed, even when you turn off the
camera.
●
Off (Default)—No date or time imprinted on the image.
●
Date Only—Date permanently imprinted.
●
Date & Time—Date and time permanently imprinted.
Exposure Compensation—Overrides the camera’s automatic exposure
setting. For more information, see
Exposure Compensation on page 22
.
●
To make the images you are about to capture brighter, press to increase
the value.
●
To make the images you are about to capture darker, press to decrease
the value.
Exposure Bracketing (
only)—Creates a set of three images captured at
the value set for Exposure Compensation and under- and over-exposed by
the value you select using
.
●
Off (Default)
●
± 0.5
●
±1.0
During Instant Review (see
), you can delete the
entire bracketing sequence. To delete individual images, see
White Balance—Balances color based on lighting conditions. For more
information, see
.
●
Auto (Default)—Corrects for scene illuminance. For general picture
taking.
●
Sun—For outdoor scenes in sunny or cloudy conditions.
●
Shade—For outdoor scenes in shade or at dusk.
●
Tungsten—For indoor scenes with incandescent or halogen lighting.
●
Fluorescent—For indoor scenes with fluorescent lighting.
ISO Speed—Adjusts the camera’s sensitivity to light. For more information,
see
.
●
Auto (Default)—Camera selects the best ISO speed for the scene.
●
ISO 100—For best quality.
●
ISO 200—For lower light conditions.
●
ISO 400—For lower light conditions and/or action when short shutter
speeds are desired.
AE Metering—Specifies which region of a scene the camera uses to calculate
the exposure.
●
Average (Default)—Useful when you want the entire scene to be used
when calculating exposure.
●
Spot—Useful in backlit scenes or when the subject is very dark or light
compared to the rest of the scene. For best results, use Focus Lock (see
) with Spot.
Chapter 3
(continued)
20