Using the camera setup menu, Using the camera setup – HP Photosmart R837 User Manual
Page 39

8
Using the Camera Setup Menu
The Camera Setup Menu allows you to set preferences for the camera’s behavior. The
Camera Setup Menu is available from the Picture Capture, Video Record, and
Playback menus.
1.
While in the Picture Capture, Video Record, or Playback menu, use
to
highlight Camera Setup..., then press
.
2.
Use
to highlight a menu option, then press
to display the menu option’s
sub-menu.
3.
Use
to highlight a setting, then press
.
4.
To exit the Camera Setup Menu, press repeatedly until you return to
Picture
Capture,
Video Record, or
Playback.
Settings you specify remain until you change them.
Display Brightness—Adjusts the brightness of the Image Display.
●
Low—For extending battery life.
●
Medium (Default)—For normal viewing conditions.
●
High—For very bright lighting conditions.
Camera Sounds—Adjusts the speaker volume for camera sounds (such as
button presses and shutter clicks) and audio recorded with video clips.
Off, Low (Default), High.
Display Timeout—Specifies the time after which the Image Display turns off
if you do not press a button.
Never, 15, 30, 45 (Default), 60 seconds.
Digital Zoom—Enables or disables digital zoom.
On (Default), Off.
Date & Time—Sets the date and time. See
USB Configuration—Specifies how a computer recognizes the camera. See
Connecting to the computer on page 33
●
Digital Camera (Default)——Recognizes the camera as a digital camera
using PTP (Picture Transfer Protocol).
●
Disk Drive—Recognizes the camera as a disk drive using MSDC (Mass
Storage Device Class).
HP Photosmart R837 Digital Camera
39