Using the picture capture and video record menus, Using the – HP Photosmart R837 User Manual
Page 18
), you can also stitch panoramas automatically as you transfer them to your
computer.
1.
While in
Picture Capture, press Mode, use
to select either Panorama
(left to right) or Panorama (right to left), then press
.
2.
Press the Shutter button to take the first picture in the panoramic sequence.
3.
Position the camera to take the second picture.
Use the transparent overlay of the first image
superimposed on one third of the Image Display to
align your second picture with the first.
4.
Press the Shutter button to take the second
picture.
5.
Continue adding up to three more pictures to the
panorama, or press
to end the panoramic
sequence.
During Instant Review (see
), each image in the panoramic
sequence is displayed. When the last image is displayed, you can stitch the sequence
by pressing , then pressing
when the stitched panorama appears. You can also
delete the panoramic sequence by pressing , selecting Entire Panoramic
Sequence, then pressing
.
Using the Picture Capture and Video Record menus
The Picture Capture and Video Record menus allow you to adjust camera settings that
affect the characteristics of the pictures and video clips you capture. The Picture
Capture Menu displays only those features available for taking pictures while the Video
Record Menu displays only features available for recording video clips.
1.
Slide
to
or
, then press
.
2.
Use
to highlight a menu option, then press
to display the menu option’s
sub-menu.
3.
Use
to highlight a setting, then press
to change the setting or press to
exit without changing the setting.
4.
To exit the menu, press repeatedly until you return to
Picture Capture or
Video Record.
For on-camera information about an option, use
to highlight Help... in the option's
sub-menu, then press
.
Chapter 3
18