haier D29FV6-A - Manual (Page 12)

CH+
CH-
VOL- VOL+ MENU
CH+
CH-
VOL- VOL+ MENU
CH+
CH-
VOL- VOL+ MENU
Prog NO. 008
Skip OFF
Sound Sys. B/G
Fine Tune
Search
Auto Search
TUN.
Search 001
125.00MHz
CALL
After searching (Continued)
Press the CH+/- buttons to check channels.
If the colour or sound is abnormal in a certain channel, it may be
because that the colour or sound system has not been set
properly, then, you may adjust it to proper system (Refer to
page 8).
TUNE
Tuning (Continued)
Search
Search
1
B/G
144MHz
NORMAL
1. Press the CH+/- buttons or Direct
select button to select the desired
channel number.
2. Press the TUNE button, the tuning
menu will appear on the screen.
( For example, the auto search mode I.)
. Press the CH+/- buttons to
move the indicator to "Search".
Prog NO. 008
Skip OFF
Sound Sys. B/G
Fine Tune
Search
Auto Search
TUN.
4. Press the VOL+ or VOL- buttons,
the TV set will begin to search up or
down, when the TV set has searched
a program, the TV set will stop
searching. If the program is not the
one you need, you can press the
button again, let the TV set continue
to search until it has searched the TV
signal you need.
Note:
Usually, five seconds after the channel has been changed, the channel
number will disappear automatically. If you want to know which channel
you are watching, just press the CALL button once.