Honeywell HRSD16 - Manual (Page 26)

Installation
26
Figure 2-6 Video Out Connector
Note The VGA and Video Out (BNC) connectors may be connected to
individual monitors for simultaneous operation.
Connecting the DVR for Remote Access
Connecting the RS-232C Port
An RS-232C port is provided to connect an external modem for remote monitoring,
configuration, software upgrades, and to connect a remote control keyboard. Use a
modem cable with a DB-9S (female) connector to connect to the DVR. See
Chapter 3,
Configuration for how to configure the modem.
Figure 2-7 RS-232C Port
Note The DVR is not supplied with a modem cable, and many
modems are not supplied with cables. Ensure that you have the
correct cable when purchasing the modem.
Connecting the Network Port
The DVR can be networked using the 10/100Mb Ethernet connector. Connect a Cat5
cable with an RJ-45 jack to the DVR connector. The DVR can be networked with a
computer for remote monitoring, searching, configuration, and software upgrades. See
Chapter 3, Configuration for configuring the Ethernet connections.
Figure 2-8 Network Port