HP 3C905B-TX - Manual (Page 16)

HP 10/100 3Com 3C905B-TX Network Interface Card Installation Guide
Software Installation Procedure
12 English
Installing the Driver
Follow these steps to install the network driver in a PC running
Windows NT version 4.0:
1 Restart the PC and start Windows NT.
2 In the Control Panel , double-click on Network .
3 In the Network window, click on the Add... button.
4 In the Select Network Component Type window, select the Adapter item
and then click on the Add... button.
5 In the Select Network adapters window, click on the Have Disk... button.
6 Insert EtherDisk diskette #2 in drive A, and in the Insert Disk window,
click on OK.
7 In the Select OEM Option box, select 3Com EtherLink Adapter
(3C905B) .
8 Click on OK.
9 Select the Protocol tab.
10 Select the appropriate protocol for your network and click on OK.
11 Close the Network window.
If you are prompted for network information, enter the information
supplied by your MIS department.
Windows NT prompts you to reboot.
12 Click on Yes to restart your PC.
The driver installation is complete.
To confirm successful installation, double-click on the
Network icon in
the Control Panel . Double click on the Adapter item. 3Com
EtherLink XL Adapter should appear in the Network
Adapters list.
3com.bk : 3com-us.fb4 Page 12 Thursday, June 18, 1998 4:17 PM