HP 3C905B-TX - Manual (Page 15)

English 11
HP 10/100 3Com 3C905B-TX Network Interface Card Installation Guide
Software Installation Procedure
5 Double-click on Network Adapters . The name of the installed network
interface card appears:
3Com EtherLink XL Adapter (3C905B) .
If this name does not appear or if a yellow exclamation mark appears
next to it, follow this troubleshooting procedure:
a In the Device Manager window, double-click on Other Devices .
b Click PCI Ethernet Controller or the duplicate
3C905B-TX NIC entry.
c Click on Remove .
d Restart your PC.
Software Installation and Update on a Windows NT 4.0 System
This section describes how to install the network driver in a PC
workstation running Windows NT version 4.0. Before you begin, obtain
EtherDisk diskette #2 and Windows NT installation files (stored under
C:\I386 on systems preloaded with Windows NT 4.0).
If Windows NT networking is not installed, you may also need the
following information from your MIS department:
• Whether you are on a LAN or are connecting to one through a
modem
• The protocol used in the Microsoft Windows Network (typically
TCP/IP or NetBEUI)
• The name of the Windows NT server domain or workgroup you
belong to
• Your IP address if you are not using DHCP
3com.bk : 3com-us.fb4 Page 11 Thursday, June 18, 1998 4:17 PM