Hitachi DZ-BD70A - Manual (Page 144)

144
A
dd
itio
na
l In
fo
rm
at
io
n
Poor playback
picture. Was the image input from an analog VCR (VHS, 8 mm)
and recorded?
The problem may be improved if a VCR equipped with a
TBC circuit is used for playback.
—
No sound. If you are viewing images on a TV, is the TV volume
control set correctly? Adjust the TV volume.
110
Not displayed
normally in the disc
navigation screen. BD, DVD-RAM, DVD-RW(VR mode) recorded on this
camcorder and edited on another device may not be
displayed normally in the disc navigation screen. In this
event, use “Update control info.”.
If too much time is required to display the HDD disc
navigation screen, try the following (DZ-BD7HA).
1 Press DISC NAVIGATION, then press MENU.
2 Select “Disc setting” or “HDD setting” (for the HDD of
DZ-BD7HA) by pressing '/(, then press the
confirmation button.
The “Update control info.” confirmation screen
appears.
3 Select “YES” by pressing &, then press the
confirmation button.
Update of control information will begin. While
“Updating...” is being displayed, a black screen may
appear (and time may be required).
(There are some BD/DVD which cannot be used even by
following the above procedures.)
—
The disc navigation
screen does not show
more than 3,999
stills from the
inserted card. If the inserted card contains more than 3,999 still
pictures, only 3,999 stills can be shown in the disc
navigation screen. However, it is possible to play back
more than 3,999 pictures.
—
Symptom Cause and Correction
Reference
page