Hitachi DZ-MV350A - Manual (Page 97)

97
E
nglis
h
QR34962
TERMINATING DISC NAVIGATION
1
Press the DISC NAVIGATION button.
Disc Navigation will be terminated and the
DVD video camera/recorder will enter the
recording pause status.
You can also press the button to end Disc
Navigation.
PLAYING BACK FROM DISC NAVIGATION SCREEN
1
Press the DISC NAVIGATION button.
2
Use the joystick to select the desired scene.
The selected scene will be framed: This is called
a “cursor”.
3
Press the button.
Playback will start from the selected scene.
Note :
Tilting the joystick to left or right will move the cursor to
the preceding or following scene.
Tilting it up or down will move to preceding or following
page.
● When playback ends:
The DVD video camera/
recorder will enter the
playback pause status at the
last image of last scene.
Pressing the or DISC
NAVIGATION button will
restore the Disc Navigation
screen.
When the playback pause status continues for as
long as 5 minutes, the Disc Navigation screen will
automatically be restored.
● Playing back stills
A still will be displayed for approx. 3 seconds.
When playing back stills on card, playback will
stop after each still playback.
Note :
• Press the button to temporarily stop playback.
Pressing again will start from that point.
• If you press the button after playback of the last
scene on disc finishes, playback will start again from the
beginning of disc.
• Pressing the button will always restore the Disc
Navigation screen.
• With playback on Disc Navigation, you can select desired
scenes for playback and skip unnecessary scenes.
• When playing back a still with a large number of pixels on
card, “Playback.” will appear, and it will take some time for
the still to appear.
0 01 / 014 A l l Pr og r ams
PLAY RAM