Hitachi DZ-MV350A - Manual (Page 92)

92
E
nglis
h
QR34962
Initial Settings
SWITCHING OPERATING SOUND ON OR OFF (BEEP)
This DVD video camera/recorder will emit a sound when the power switch is changed over, the REC
button is pressed to record a movie, or other operations are engaged. If you do not need operating sound,
you can switch it off.
1
Press the MENU button,
choose “Beep” on the
“Initial Setup” menu
screen, and then press the
button.
2
Select “On” or “Off”, and then press the
button.
3
Press the MENU button to end the setting.
Note :
The “Beep” setting will be stored in memory even when the
DVD video camera/recorder is turned off.
TURNING DVD VIDEO CAMERA/RECORDER OFF AUTOMATICALLY
(POWER SAVE)
This DVD video camera/recorder is equipped with power save function. Specify “Power Save: On”: If the
DVD video camera/recorder is left in the recording pause status without being operated for 5 minutes,
it will automatically turn off to prevent the battery from discharging needlessly.
1
Press the MENU button,
choose “Power Save” on
the “Initial Setup” menu
screen, and then press the
button.
2
Select “On” or “Off”, and
then press the
button.
3
Press the MENU button to end the setting.
Note :
• To turn the DVD video camera/recorder on again from
automatic off activated by the power save function, set
the power switch to “POWER OFF”, and then set it to “
VIDEO”, “ PHOTO” or “ PHOTO”
• The Power Save setting will not appear in the on-screen
information display.
• The Power Save setting will be stored in memory even
when the DVD video camera/recorder is turned off.
Setting Content
On Beep is heard
Off No beep is heard
I n i t i a l S e t u p
On
O f f
RAM
Po w e r S a v e
Be e p
ENTER RETURN
Demo Mode
Re s e t
L a n g u a g e
R e c o r d LED
Setting Content
On To engage power save
Off To cancel power save
I n i t i a l S e t u p
On
O f f
RAM
Po w e r S a v e
Be e p
R e c o r d LED
ENTER RETURN
Demo Mode
Re s e t
L a n g u a g e