Hitachi DZ-MV350A - Manual (Page 86)

86
E
nglis
h
QR34962
Setting Up Record Functions
SWITCHING MOVIE QUALITY (VIDEO MODE)
Choose the movie quality from “XTRA” (only with DVD-RAM disc), “FINE”, “STD” and “LPCM” (only
with DVD-R disc).
1
Press the MENU button,
choose “VIDEO Mode”
on the “Record Functions
Setup” menu screen, and
then press the
button.
2
Choose the desired quality mode, and then press
the
button.
3
Press the MENU button to end the setting.
Note :
• The movie quality setting will be stored in memory even
when the DVD video camera/recorder is turned off.
• The “VIDEO Mode” setting will not change even if the
DVD-RAM disc is replaced with a DVD-R disc, or vice
versa. However, if “XTRA” has been set with DVD-RAM
disc, or “LPCM” has been set with DVD-R disc, “FINE” will
be set when the disc is changed.
• When using DVD-R disc, you cannot switch the movie
quality while recording on the disc: The DVD video
camera/recorder will be automatically set to the movie
quality first used with the disc for recording.
• The movie quality setting is effective only during movie
recording: Switching the movie quality will not work
during still recording.
It is recommended that you record critical subjects in the “XTRA” or “FINE” when you are using a DVD-
RAM disc, or in the “FINE” with a DVD-R disc.
Re c o r d F u n c t i o n s S e t u p
F I NE
STD
RAM
XTRA V I DEO Mode
PHOTO I n p u t
Se l f T i mer
OSD Ou t p u t
I n p u t Sou r ce
ENTER RETURN
8 : 0 0 AM
9 / 3 0 / 2 0 0 3
3 0 MIN
0 : 0 0 : 0 0
REM
FINE Movie quality