Hitachi DZ-MV350A - Manual (Page 70)

70
E
nglis
h
QR34962
JUMPING TO SPECIFIED POINT (GO TO)
1
Press the MENU button
during playback.
2
Choose the option (point
you want to go to), and
then press the
button.
Top : To go to the start, and enter playback
pause.
End : To go to the end of last scene, and enter
playback pause.
Specify : To go to a specified point and enter
playback pause. See the following for
details.
● Specifying the point to view
1
Choose “Specify” in step 2 above, and then press
the
button.
The screen for specifying the point to go to will
appear.
2
Use the joystick to select the desired time of
chosen point.
: To select the start.
: To select the end.
:·Press once: To move the cursor in 10-
second units (1-still units
for card)
· Hold down: To move the cursor in 1-
minute units (10-still units
for card)
3
Press the button to enter the selection.
The DVD video camera/recorder will go to the
specified point and enter the playback pause
status.
To cancel the “Go To” procedure midway, press the
button before going to the specified point.
Note :
• If multiple scenes are selected using the Disc Navigation
function or SELECT button, choosing “Top” will jump to
the beginning of selected scenes (P. 125).
• When multiple scenes are selected, the total time of
selected scenes will appear in the “total recording time”
display.
• When card is loaded, the number of stills will appear.
• The cursor may not move at same-pitch intervals.
Go T o
RAM ENTER RETURN
En d
S p e c i f y
To p
Go t o
TOP END ENTER CANCEL
GO TO
0 : 00 : 00 0 : 24 : 24 0 : 03 : 26
0 : 03 : 26
TOP END CURRENT
Position of currently
played back image Total recording time of
all selected scenes
Cursor
Cursor position
Go t o
TOP END ENTER CANCEL
TOP
GO TO
END CURRENT
0 : 00 : 00
0 : 00 : 00 0 : 24 : 24 0 : 03 : 26
(When the start of scene is selected)
Cursor at current image position.
Cursor at (GO TO) position.