haier DWL3025 - Manual (Page 7)

6
REQUIREMENTS
Do not run water drain lines or electrical wiring where they can interfere with or contact
dishwasher motor or legs.
The location where the dishwasher will be installed must provide clearance between motor
and flooring.
Do not install dishwasher over carpeted flooring.
Protect dishwasher and water lines leading to dishwasher against freezing.
Damage from freezing is not covered by the warranty.
Check location where dishwasher will be installed. The location must provide:
- Easy access to water, electricity and drain.
- Convenient loading. Corner locations require a 2” (5.1 cm) minimum clearance between the
side of the dishwasher door and wall or cabinet.
- Square opening for proper operation and appearance.
- Cabinet front perpendicular to floor.
- Level floor. If floor at front of opening is not level with floor at rear of opening, shims may
be needed to level dishwasher.
NOTE: Shims must be securely attached to floor to
prevent their movement when dishwasher is being
operated.
If dishwasher will be left unused for a period of time or
in a location where it may be subject to freezing, have
it winterized by authorized service personnel.Make sure
pipes, wires and drain hose are within the shaded area.
See page 9 for dimensions.
Cabinet Requirements
HELPFUL TIP:
If the floor in the dishwasher opening in uneven (example: tile flooring only part way
into opening) you will needed to take special care in measuring dimensions and in
leveling dishwasher.