haier DWL3025 - Manual (Page 6)

5
In addition for new installations
Q. Electric drill
R. ½”, ¾”and 1½” hole saw bits
S. Small tubing cutter
T. Wire stripper
U. 1½”-2” screw-type clamp if connecting to waste-tee
V. Copper tubing (
3 /
8
” recommended) or flexible strainless steel braided fill line
W. Clamp connector or conduit connector to fit a 7 /
8
” (2.2 cm) diametre hole
® Teflon is a registered trademark of E.I. Du Pont de Nemours and Company.
Parts supplied
A. 2 drain hose clamps
1-large
1-small
B. 2 No. ST4.2 X 18 Phillips head screws
C. Drain hose
Make sure all these parts are included.