beautypg.com

Havis-Shields 2000-2005 Chevrolet Impala Trak-Mount Kit C-TM-IMP User Manual

Page 2

background image

C-TM-IMP-INST-2-07

2

INSTALLATION:

1. REMOVE SEATS:

• Remove rear seat base torx bolts.

• Slide seat to rear most position.
• Seats do not have to come out of vehicle, they will just need to be tilted out of way to

place Trak-Mount assembly. Be careful of wire plugs if vehicle has power seats.

2. MOUNT ASSEMBLED TRAK-MOUNT:

• Place Trak-Mount assembly so front bracket sets squarely on floor beam straddling

seat bolts – lag bolt to the floor beam. The rear hump brackets are place on floor
between floor of vehicle and seat base and can be mounted using the rear seat bolts.

• Re-mount seats over Trak-Mount assembly and tighten all hardware.

• Mount equipment (consoles, control heads, etc), prior to plastic end caps, for access

to hardware slots.

Rear Hump Bracket

(Driver Side)

Rear Hump Bracket

(Pass. Side)

Front Hump Bracket

Trak