Using an internet connection to configure a camera, Configuring motion detection, Figure 4-12 – Honeywell HREP4 User Manual
Page 90: Internet connection camera setup window
90
Using the Web Remote Viewer
Figure 4-12
Internet Connection Camera Setup Window
Using an Internet Connection to Configure a Camera
You can configure a camera’s title, live color display, PTZ setup, and motion detection
settings.
1. Click Camera again under Camera in the field on the left.
appears.
2. Make your configuration selections, and then click Ok to save.
Configuring Motion Detection
1. Click Motion under Camera. The Motion Setting window opens.