Configuring the, Ptz setup, Figure 2-18 – Honeywell HREP4 User Manual
Page 37: Ptz setup menu, Figure 2-19, Ptz property window, Configuring the ptz setup
HREP Color Digital Video Recorder User Guide
Document 800-06847 Rev B
37
08/10
Configuring the PTZ Setup
Click PTZ on the left side of the CAMERA window. The PTZ Setup menu appears.
Figure 2-18
PTZ SETUP Menu
Click each value in the ADDRESS, PROTOCOL, and BAUD RATE columns to configure
them. Use the
to change the following values:
Configuring Details for PTZ Cameras
Click DETAIL on the PTZ SETUP menu. The PTZ Property window appears.
Figure 2-19
PTZ Property Window
ADDRESS
The unique ID of the PTZ device
PROTOCOL
The protocol of the PTZ device
BAUD RATE
The baud rate of the PTZ device
DETAIL
Detailed settings for the PTZ device. See
TOUR