Figure 2-48, Ip network setup window, Configuring network ip settings – Honeywell HREP4 User Manual
Page 55
HREP Color Digital Video Recorder User Guide
Document 800-06847 Rev B
55
08/10
Configuring Network IP Settings
Figure 2-48
IP NETWORK Setup Window
Click the IP SETUP menu tab if it isn’t already selected, then configure the following:
DHCP
When enabled, the DVR will obtain an IP address
automatically if it is connected to a DHCP server or router.
IP ADDRESS
If DHCP is not being used, then the IP address can be
manually set.
GATEWAY
If DHCP is not being used, then the gateway IP address
can be manually set.
SUBNET MASK
If DHCP is not being used, then the subnet mast can be
manually set.
1st DNS SERVER
If DHCP is not being used, then the first DNS server can be
manually set.
2nd DNS SERVER
If DHCP is not being used, then the second DNS server can
be manually set.