HP 4100 mfp - Manual (Page 31)

Duplex copying and printing 29
Duplex copying and printing
If a duplexer is installed, you can print or copy on both sides of the paper. The duplexer
supports the following media sizes:
● Letter
● Legal
● Executive
● A4
● B5 (JIS)
The duplexer does not support custom sizes.
Note The Tray 2 dust cover must be removed when the duplexer is installed. See the
documentation included with the duplexer for installation and usage instructions.
Guidelines for duplexing
● Do not print or copy on both sides of labels, transparencies, envelopes, vellum, or
media heavier than 105 g/m
2
(28 lb). Jams might occur with these types of media,
and damage to the product might occur with labels.
● You might need to configure the printer driver to recognize the duplexer. See the
printer driver online Help for details.
● To duplex, make the appropriate selection in your software program or printer driver.
See the printer driver Help.
● If you do not use the printer driver that came with the product, you might need to
change the Duplexing setting in the Printing menu to
DUPLEXING=ON . Also in the
Printing menu, set Binding to long- edge or short-edge. For more information, see
“Layout options for duplexing” on page 31 .
● Close the rear output bin when using the duplexer. Opening the rear output bin
disables the duplexer.
Removed Installed