Honeywell PRESTIGE THX9321 - Manual (Page 75)

THX9321 PRESTIGE ® 2.0 AND THX9421 PRESTIGE ® IAQ WITH EIM
75 68-0311—02
Overriding schedules: residential use
1. Touch  or  to adjust the temperature (right side of
screen) and the Hold Until time (left side). The schedule
will resume when the Hold Until time expires.
Fig. 86.
2. Touch Switch to Permanent Hold to keep the same tem-
perature until you change it or resume the program
schedule.
3. Touch Cancel Hold at any time to resume the program
schedule.
Overriding schedules: commercial
use
Touch or  to adjust the temperature. It will be maintained
until the hold time you set.
Fig. 87.
• To change the hold time, touch the Hold Until arrow buttons.
This time can be adjusted up to the maximum time set by
the installer.
• Touch Override to use a pre-set occupied temperature if a
person uses the room during an unoccupied period. The
new temperature will be maintained for 1 hour and can be
adjusted up to the maximum time set by the installer.
Fig. 88.
The programmed schedule will resume when the override timer
expires. Touch Cancel Hold at any time to resume the program
schedule.
Viewing equipment status
1. Touch MENU.
Fig. 89.
2. Select Equipment Status.
Fig. 90.
Switch To
Permanent Hold
OVERRIDE
MENU
Equipment Status