HP VECTRA VA 6/XXX User Manual
Page 47
English
39
3 Troubleshooting Your PC
If Your PC Has a Hardware Problem
If Your Mouse Does Not Work
•
Ensure that the mouse is correctly connected.
•
Ensure that the mouse driver supplied with the preloaded software
is installed correctly. (Choose a Logitech® mouse driver.)
•
Clean the mouse ball and rollers as shown in the figure below (use a
non-residual contact cleaner).
If Your Printer Does Not Work
•
Make sure the printer’s power switch is ON.
•
Verify that the power cord is plugged into the power outlet and the
printer.
•
Verify that you have the correct cable for the printer. Make sure that
it is securely connected to the correct connector (port) on the PC
and printer.
•
Check that the printer is online.
•
Examine the paper feed mechanism for a paper jam.
•
Make sure that the printer is configured correctly for the PC and for
the application.
a
Ensure the PC’s port has been correctly configured using Setup.
b Make sure the printer is correctly set up in your operating
system’s configuration.
c
Ensure the application program’s “print” menu has been correctly
set up. (Refer to the manual supplied with the application
software.)
•
Check that the PC’s port is working properly by running another
peripheral connected to the port.
•
If you receive an error message, refer to the printer’s manual for help.
Cleaning the mouse rollers
Cleaning the mouse ball
cobra-m3.fb4 Page 39 Wednesday, May 15, 1996 3:31 PM