HP 3C509B ISA - Manual (Page 26)

8 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter
Connecting to a Novell NetWare 4.11 Server
26 Specify your Computer Name, Workgroup or Domain (Contact your
network administrator if you do not have the required information) and
click on “Next”.
27 Click on “Finish” to complete the installation.
28 Remove the 3Com driver disk from the floppy drive and select “Yes” at the
prompt to shut down and restart your computer for the new settings to
take effect.
29 Log onto Windows NT4 Workstation with administrator privileges.
30 From the location of the “Novell IntranetWare Client v.4.11b” installation
files, execute “Setupnw.exe”.
31 Click on “Continue” to continue with the Novell IntranetWare Client
installation.
32 Click on “Yes” to agree to the Software License Agreement to begin
installation.
33 Click on the “Reboot” button at the completion of the Novell NetWare
Client installation to restart the machine for changes to take effect.
34 Click on the “IntranetWare” tab of the Novell IntranetWare Client Services
Login screen.
35 Select “NDS Login” and specify the Preferred Server Name (Contact your
network administrator if you do not have the required information).
36 Click on the “Login” tab and specify your Name and Password to login.
37 Install the Windows NT4 Service Pack 4 application to correct the error
messages in the Event Viewer.
38 Install the Hewlett-Packard Soft Power Down application once the
Service Pack 4 has been installed.