beautypg.com

Havis-Shields 1995-2007 Ford Crown Victoria Trak-Mount Kit C-TM-CV User Manual

Page 2

background image

C-TM-CV-INST-2-07

2


• Attach trak to rear hump bracket using (2) ¼-20 x ¾” Hex head bolts and serrated

nuts.

Note: There is a driver and passenger side bracket to the Rear Hump Bracket. Top of
brackets will be parallel to the transmission hump.


INSTALLATION:

1. REMOVE SEATS:

• Remove rear seat base nuts (18mm).
• Slide seat to rear most position.

• Remove front seat base bolts (13mm).

• Seats do not have to come out of vehicle, they will just need to be tilted out of way to

place Trak-Mount assembly. Be careful of wire plugs if vehicle has power seats.

2. MOUNT ASSEMBLED TRAK-MOUNT:

• Attach the driver and passenger side front hump brackets to the inner front seat bolts.

• Place Trak-Mount assembly so rear hump bracket are between floor of vehicle and

seat base.

• Re-mount seats assembly and tighten all hardware.

• Mount equipment (consoles, control heads, etc).


Front Hump

Bracket

Rear Hump

Bracket

(Pass. Side)

Rear Hump

Bracket

(Driver Side)

Trak