Hitachi L19D103 - Manual (Page 30)

30
Off: There is no sound output from DIGITAL AUDIO
OUT jack.
PCM: Change Dolby Digital to PCM for the output.
Select when connected to a 2 channel digital
stereo amplifier.
Bitstream: Disc audio bitstream data will be output.
4
Press SETUP/TV MENU to remove the menu screen.
NOTE:
This function works only during playback of Dolby Digital
recorded discs.
The level of Dynamic Range Reduction may differ depending on
DVD video disc.
Even if you select “Bitstream”, MPEG audio will be output in
PCM format.
Parental control
Some discs are specified not suitable for children. Such
discs can be limited not to play back with the unit.
Password and setting:
1
Press SETUP/TV MENU in the stop mode or No Disc.
Press ▲ or ▼ to select “Locks”, then press ▶ or ENTER.
2
Press ▲ or ▼ to select “Parental Control”, then press ▶ or
ENTER.
“Enter Password” screen will appear.
3
Press “0000” using Number buttons (0-9). (This is pre-
setting password of this unit). Then press ENTER.
If you input a wrong number, press CANCEL. •
Parental Control : Off
Password : Change
Enter Password
Language
Video
Audio
Locks
4
The parental level list will appear. Press ▲ or ▼ to select the
level 1 to level 8. The limitation will be more severe as the level
number is lowered. Then press ENTER.
Password
Language
Video
Audio
Locks
1
2
3
4
5
6
7
8
Off
Parental Control
Level Off : The parental control setting does not function.
Level 8 : Virtually all DVD software can be played back.
Level 1 : DVD software for adults cannot be played
back.
Select from level 1 to level 8. The limitation will be more
severe as the level number decreases.
•
•
•
•
5
Press SETUP/TV MENU to remove the menu screen.
NOTE:
If each setup (P.28~30) has been completed, the unit will
use these settings during DVD playback.
Each setup will be retained in memory.
Depending on the discs, the unit may not be able to limit
playback.
Some discs may not be encoded with specific rating level
information though its disc jacket says “adult”. For those discs,
the age restriction will not work.
After the rating is locked, the setting cannot be changed unless
you enter the correct password.
•
•
•
•
•
•
•
Setting the new password:
1
Press SETUP/TV MENU in the stop mode or No Disc.
Press ▲ or ▼ to select “Locks”, then press ▶ or ENTER.
2
Press ▲ or ▼ to select “Password”, then press ▶ or ENTER.
“Enter Current Password” screen will appear.
3
Press Number buttons (0-9) to enter the password you have
stored.
If you input a wrong number, press CANCEL. •
4
Then press ENTER. “Enter New Password” screen will
appear. Press Number buttons (0–9) to input the new
password.
Parental Control : Off
Password : Change
Language
Video
Audio
Locks
Enter New Password
5
Press ENTER.
Now your new password has been set.
Be sure to remember this number!
NOTE:
If you forget your password it can be reset. With no disc in the
player and in DVD mode, press STOP on the unit. Continue
holding the button and press 7 on the remote control at the
same time. “Password Clear” appears on the screen. Now the
password has been returned to the initial value (0000).
Temporary disabling of rating
level by DVD disc
Some pre-recorded DVD discs may attempt to temporarily
cancel the rating level that you have set. You will be given
the option to allow or not allow the override.
1
Load a DVD disc (see page 23).
2
If the DVD disc has been designed to temporarily cancel the
Rating level, the screen which follows the “Reading” screen
will change, depending on which disc is played. If you select
“YES” with ENTER key, password input screen will then
appear.
3
Enter the password with Number buttons (0-9).
Then press ENTER.
If you interrupt the entering, press RETURN. •
Enter Password
4
Playback will commence if the entered password is correct.
NOTE:
This temporary cancellation of the rating level will be kept until
the disc is ejected.
When the disc is ejected, the original rating level will be set
again automatically.
•
•
52C1221B_eng.indd 30 52C1221B_eng.indd 30 6/26/09 5:25:23 PM 6/26/09 5:25:23 PM