Hitachi L19D103 - Manual (Page 24)

24
4
Press STOP to end playback.
The unit memorizes the stopped point, depending on the
disc. “ ” appears on the screen. Press PLAY to resume
playback (from the scene point).
If you press STOP again (“ ” appears on the screen) or
unload the disc, the unit will clear the stopped point.
•
•
5
Press (EJECT).
Remove the disc and then press POWER.
The unit turns off.
When you eject the disc, you may hear mechanism noise, but
it is not malfunction.
NOTE:
If a non-compatible disc is loaded, “Incorrect Disc”, “Region
Code Error” or “Parental Error” will appear on the TV screen
according to the type of loaded disc. If these appear, check your
disc again (see pages 9 and 30).
Some discs may take a minute or so to start playback.
If an 8 cm disc is placed into the disc slot and picture playback
or menu display does not begin automatically, press PLAY.
A “Prohibition” symbol “ ” may appear at the upper right of the
screen. This symbol means either the feature you tried is not
available on the disc, or the unit cannot access the feature at
this time. This does not indicate a problem with the unit.
If you place a single-faced disc label backwards (i.e. the wrong
way) “Reading” will appear in the display and then “Incorrect
Disc” will be displayed.
Some playback operations of DVDs may be intentionally fixed
by software producers. Since this unit plays DVDs according to
the disc content recorded, some playback features may not be
available. Also refer to the instructions supplied with the DVDs.
Special playback
Fast Forward Playback
Press SEARCH during normal playback.
Each press of SEARCH will increase the speed of the search
(x 2), (x 4), (x 8), (x 15).
(CD: (x 2), (x 4), (x 8), (x 20))
To resume normal playback, press PLAY.
Review Playback
Press SEARCH during normal playback.
Each press of SEARCH will increase the speed of the search
(x 2), (x 4), (x 8), (x 15).
(CD: (x 2), (x 4), (x 8), (x 20))
To resume normal playback, press PLAY.
Still Playback
Press PAUSE during normal playback to pause playback.
To resume normal playback, press PLAY.
Frame Advance
Press PAUSE during still playback.
One frame is advanced each time you press PAUSE.
To resume normal playback, press PLAY.
Slow-motion Playback
Press SLOW Reverse or SLOW Forward during normal
playback or still playback.
Each press of SLOW will change the speed of the slow x1/2, x1/4,
x1/6, x1/7.
To resume normal playback, press PLAY.
To resume the still playback, press PAUSE.
Locating a chapter or track
Press SKIP Forward or SKIP Reverse during playback to
locate a chapter that you want to watch.
Each time you press the button, a chapter or track is skipped.
•
•
•
•
•
•
•
•
•
•
•
•
NOTE:
The unit is capable of holding a still video image or On screen
display image on your television screen indefinitely. If you leave
the still video image or On screen display image displayed on
your TV for an extended period of time, you risk permanent
damage to your television screen.
There may be a slight delay between when you press the button
and the function activating.
MP3/WMA/JPEG and Audio
CD playback
This player can play back MP3/WMA/JPEG-data which has
been recorded on CD-R or CD-RW. To produce MP3/WMA/
JPEG-data, you need a Windows-PC with CD-ROM drive and
MP3/WMA/JPEG-encoding software (not supplied).
The Apple-HFS-System cannot be played.
MP3/WMA/JPEG CD information
Limitations on MP3/WMA/JPEG CD playback
MP3/WMA/JPEG CD is the disc that is standardized by
ISO9660, its file name must include 3-digit extension letters,
“mp3”, “wma”, “jpg”.
The directory and file names of MP3/WMA/JPEG CD must
correspond to ISO standardized files.
This unit can read 2000 files per disc. If one directory has more
than 2000 files, it reads up to 2000 files, the remaining files will
be omitted.
MP3/WMA CDs cannot be used for playback for the purpose of
recording.
It may take more than one minute for this unit to read MP3/
WMA/JPEG files depending on its structure.
Music recorded by “Joliet Recording Specification” can be
played back.
The music files recorded by “Hierarchical File System” (HFS)
cannot be played.
The unit can play back baseline and progressive JPEG files.
Limitations on display
The maximum number for display is 15 characters. Long file
names will be condensed.
Available letters for display are the following: capital or
lowercase letters A through Z, numbers 0 through 9, “&”, “(”, “)”,
“+”, “.” and _ (underscore).
Other letters than those above are replaced by a hyphen.
Notes on MP3/WMA/JPEG files
To play back MP3/WMA/JPEG CD in the recorded order,
Use MP3/WMA/JPEG software that records data alphabetically
or numerically.
Name each file including a two-digit or three-digit number (e.g.
“01” “02” or “001” “002”).
Refrain from making too many sub-folders.
CAUTION:
Some MP3/WMA/JPEG CDs cannot be played back depending
on the recording conditions.
The CD-R/RW that has no music data or non-MP3/WMA/JPEG
files cannot be played back.
MP3/WMA/JPEG CD and Audio CD playback:
1
Load a MP3/WMA/JPEG CD or an Audio CD in the disc slot.
2
“Reading” will appear on the TV screen. Reading time will
depend on the number of files on the disc.
3
A file browser screen will appear on the TV screen.
•
•
•
•
•
•
•
•
•
•
•
•
•
1.
2.
3.
•
•
52C1221A_eng.indd 24 52C1221A_eng.indd 24 5/13/09 4:44:36 PM 5/13/09 4:44:36 PM