Hitachi L19D103 - Manual (Page 26)

26
Folder-1
Folder-2
MP3-1
MP3-2
MP3-3
WMA-1
WMA-2
WMA-3
JPEG Preview
Repeat :Off
Mode :Off
Edit Mode
2
Press ▲/▼/◀/▶ to select the file you want to add into the
program list.
Press ENTER. Selected file is marked.
Repeat this procedure to select the other files.
Folder-1
Folder-2
MP3-1
MP3-2
MP3-3
WMA-1
WMA-2
WMA-3
JPEG Preview
Repeat :Off
Mode :Off
Edit Mode
/MP3-1.MP3
3
Press ▲/▼/◀/▶ to select “Add To Program”.
Then press ENTER. All marked files are added into the
program list.
When you finish storing the files you want into the Program
list, select “Edit Mode” again and press ENTER to release edit
mode.
Folder-1
Folder-2
MP3-1
MP3-2
MP3-3
WMA-1
WMA-2
WMA-3
JPEG Preview
Edit Mode
Program View
Add To Program
4
Press ▲/▼ to select “Program View”, then press ENTER.
Program View shows only the programmed files that you have
added in Step 2.
Folder-1
Folder-2
MP3-1
MP3-2
MP3-3
WMA-1
WMA-2
WMA-3
JPEG Preview
Edit Mode
Program View
Add To Program
MP3-1
MP3-2
MP3-3
WMA-3
JPEG Preview
Edit Mode
Browser View
Clear Program
Browser View Program View
5
In the Program View, press PLAY. The files start to playback in
programmed order that were added by you.
To remove file from program list in stop mode
In the Edit Mode, switch to Program View. Select the files you want
to remove, then press ENTER. Select “Clear Program” and press
ENTER. Marked file is removed from program list.
NOTE:
The program is canceled when you eject the disc or turn the
power off.
Repeat playback (CD)
1
In the file browser, press ▲/▼/◀/▶ to select “Repeat”.
2
Press ENTER repeatedly to select “Track” or “All”.
Folder-1
Folder-2
MP3-1
MP3-2
MP3-3
WMA-1
WMA-2
WMA-3
JPEG Preview
Select Files
Repeat :Track
Mode :Off
•
3
Press PLAY.
The unit automatically starts repeat playback after finishing
the current track.
To resume normal playback, select Repeat : “Off” in step 2.
NOTE:
The repeat or random function is canceled when you eject the
disc or turn the power off.
The track repeat function is canceled when SKIP or is
pressed.
In case of Audio CD, the function of A-B Repeat also can be
used (See “A-B Repeat Playback” on page 27).
Random playback (CD)
1
In the file browser, press ▲/▼/◀/▶ to select “Mode”.
2
Press ENTER to select “Random”.
Folder-1
Folder-2
MP3-1
MP3-2
MP3-3
WMA-1
WMA-2
WMA-3
JPEG Preview
Select Files
Repeat :Off
Mode :Random
3
Press PLAY.
The Random playback will start.
To resume normal playback, select Mode : “Off” in step 2.
Zooming
This unit will allow you to zoom in on the frame image. You can
then make selections by switching the position of the frame.
1
Press ZOOM during playback.
The center part of the image will be zoomed in.
Each press of ZOOM will change the ZOOM magnification
1 (x 1.3), 2 (x 1.5) and 3 (x 2.0).
2
Press ▲/▼/◀/▶ to view a different part of the frame.
You may move the frame from the center position UP, DOWN,
LEFT or RIGHT.
3
In the zoom mode press ZOOM repeatedly to return to a 1:1
view ( Off).
NOTE:
You can select the Pause, Slow or Search playback in the zoom
mode.
Some discs may not respond to zoom feature.
Locating desired scene
Use the title, chapter and time recorded on the disc to locate
the desired point to playback.
1
Press JUMP during playback or stop mode.
Time
Title
Chapter
Jump
2
Press ▲ or ▼ to select the “Title”, “Chapter” or “Time”.
3
Press Number buttons (0–9) to input the number.
If you input a wrong number, press CANCEL.
Refer to the package supplied with the disc to check the
numbers.
•
•
•
•
•
•
•
52C1221B_eng.indd 26 52C1221B_eng.indd 26 6/26/09 5:25:18 PM 6/26/09 5:25:18 PM