HP B6191-90015a - Manual (Page 66)

66 Chapter 5
Using the Diagnostic/IPR Media to Install Diagnostics on Your System
Installing Online Support Tools from the Diagnostic/IPR Media (CD-ROM)
11.Select "OnlineDiag" and use the "Actions" menu option "Open Item" for a list of
products available from the CD-ROM:
Figure 5-3 Listing Available Online Diagnostic CD-ROM Products
Highlight the product to be installed. Use the "Actions" menu option "Mark for Install"
to indicate that the highlighted product is to be installed. Repeat the selection process
until all the desired products have been marked for installation.
It is not necessary to select EMS-Config and EMS-Core products, since these are
automatically installed when you install Support Tools Manager for HP-UX 10.20 or
11.x (IPR 9902 or later).
Most users select the offline diagnostics (LIF-LOAD) and the Support Tool Manager
(Sup-Tool-Mgr-x00) to be installed as shown in the following example. If you have an
S800 system, you may also choose HP Predictive Support (not shown in this example,
since it is not available on S700 systems).