HP D2842W - Manual (Page 6)

HP 19” Color Monitor User’s Guide
Setting Up Your Monitor
4 English
Setting Up Your Monitor
Where to Place the Monitor
Place your monitor on a flat sturdy surface.
Ensure the operating site is free from excessive heat, moisture, dust and
sources of electromagnetic fields. Sources of electromagnetic fields include
transformers, motors, and other monitors.
Avoid exposing the monitor to direct sunlight.
Connecting the Cables
NOTE
Before you connect any cables, or install your HP monitor, refer to the safety
instructions at the beginning of the manual. Refer also to the user manual
which accompanies your PC and video adapter to ensure this equipment is
correctly installed.
1 Make sure your computer and monitor are switched off.
2 Connect the video cable (it has a 15-pin plug) to the video outlet on your
computer and to the video outlet on the rear of your monitor. Tighten the
thumbscrews on the plug.
3 Connect the power cord to the monitor.
4 Plug the power cord into a grounded power outlet.
NOTE
The location of your computer’s video outlet may be different to the one shown
in the diagram. Refer to the manual that came with your computer, if
necessary.
Video cable
Power Cords
1 PC and Monitor OFF
2
3
4
andros.bk : andr-us.fb4 Page 4 Monday, December 21, 1998 3:51 PM