Technical specifications – HP D2842W User Manual
Page 17
English 15
HP 19” Color Monitor User’s Guide
Technical Specifications
Technical Specifications
1.
Use the standard image sizes to avoid distortion of the displayed image.
PICTURE TUBE
Size
19-inch flat screen/ 18-inch viewable image
Phosphorous
Red, Green, Blue short persistence
Dot pitch
0.26 mm
Face Plate
Anti-glare, multilayer coating
INPUT SIGNAL
Video
0.7 Vp p analog RGB
Synchronization
Separated H/V (TTL level), H/V mixed (TTL level), sync-on.
green
INTERFACE
Input Connector
15-pin mini D-SUB
SCANNING FREQUENCY
Horizontal
30 to 96 kHz
Vertical
50 to 200Hz
MAX. RESOLUTION (H
×
V)
1600
×
1200 (75 Hz)
WARM-UP TIME
30 minutes to reach optimum performance level
PIXEL CLOCK
203 MHz
IMAGE SIZE
Standard size
1
:350(H) x 262(V) mm
Maximum size: 365(H) x 274(V) mm
POWER SOURCE
AC 90 to 264 V, 47 to 63 Hz, 140W (max), less than 8W in Suspend mode, less than 3W in Sleep mode,
less than 3W when switched Off.
OPERATING ENVIRONMENT
Temperature
10
°
C to 40
°
C (operating)
- 20
°
C to +60
°
C (storage)
Humidity
10% RH through 80% RH (without condensation)
CABINET DIMENSIONS
468(H)
×
458(W)
×
479(D) mm (with stand)
NET WEIGHT
24,3 kg (53.57 lbs)
TILT/SWIVEL STAND
Tilt Angle
- 5
°
to +13.5
°
Swivel Angle
±
45
°
andros.bk : andr-us.fb4 Page 15 Monday, December 21, 1998 3:51 PM