Hitachi 42PD7800 - Manual (Page 42)

42
OPERATING INSTRUCTIONS (continued)
PICTURE MENU (TV/Video mode) (continued)
Selected characters
Color Management
Setup hint
Turn On when the original balance of each color is required to adjust
depending on the user’s preference.
This adjusts listed colors individually to make them either deeper or
more pure. These settings are independently stored in each of the 4
Color Temperature modes.
Select the single color screen when that is required to adjust R/G/B
level individually depending on the user’s preference. And set it back
to RGB mode that indicates all color after adjusting.
Press the OK button every time the setting is changed.
This adjusts R/G/B level or tint to make the color appear natural for
the user’s preference. These settings are independently stored in
each of the 4 Color Temperature modes.
This does not work for receiving PAL/SECAM signal.
Guide display become unavailable to select with gray color.
Off On
RGB R G B
Magenta Magenta is weakened. Magenta is strengthened.
Red Red is weakened. Red is strengthened.
Yellow Yellow is weakened. Yellow is strengthened.
Green Green is weakened. Green is strengthened.
Cyan Cyan is weakened. Cyan is strengthened.
Blue Blue is weakened. Blue is strengthened.
Color Decoding
Red Darkens red only. Lightens red only.
Green Darkens green only. Lightens green only.
Color Decrease color intensity. Increase color intensity.
Tint
Enhances red and weakens
green. Enhances green and weak-
ens red.