Hitachi 42PD7800 - Manual (Page 16)

16
Connecting to a PC
(1) Make sure that the display signal of the personal computer to be used is compatible with the specifications of this
device.
• See "Product Specifications" concerning the specifications of this device. ȁ
(2) Make sure that the power switch of the personal computer is turned off.
(3) Connect the signal input terminal (RGB 1 or RGB 2) on the rear panel of this device to the display signal output
terminal of the personal computer.
• Use a cable that fits the input terminal of this device and the output terminal of the personal computer.
• Depending on the type of personal computer being connected, the use of an optional conversion adapter or the adapter provided with
the personal computer may be necessary in some cases. For details, refer to the instruction manual of the personal computer or ask
the personal computer manufacturer or your local retail dealer.
53 57
(D-sub) (DVI)
Monitor (rear panel)
Speaker (R) Speaker (L)
Power cable
connector
Power
cord
To signal
output
terminal
(DVI) To audio
output
terminal To audio
output
terminal
3.5mm
Stereo
mini jack
PC
To signal
output
terminal
(D-sub) To signal
output
terminal
(DVI)
(Example)
DVD Player
Connecting to a PC Device Connecting to an Audio Visual Device
• Setting
RGB1: DVI-PC
RGB2: RGB
For details, refer to
ȁ
• Setting
RGB1: DVI-STB
RGB2: Component
For details, refer to
ȁ
INSTALLATION INSTRUCTIONS (continued)
56 57 55 56