Hitachi 42PD7800 - Manual (Page 39)

39
ENGLISH
FUNCTION MENU
MENU Picture
Audio
Timer
Function
Setup
Language
Select
OK Set Function
Screen Saver
Off
Screen Wipe On 60Min.
Black Side Panel Off
Video Power Save Off
Freeze Mode Split
Default Zoom Panoramic
Panel Life Nomal
Luminance Manager Off
Slide Interval 5Sec.
Reset Reset
Select Set Return
Function
Mode Display
Off
ID Number 1
Inverse On 60Min.
Standby White Off
Gamma 2.2
Reset Reset
Select Set Return
Off 5Min. 10Min.
60Min. 40Min. 20Min.
Off On
Off On
Split Strobe
Panoramic 4:3
Normal Extend 1 Extend 2
Off On
5Sec. 10Sec. 30Sec.
Selected characters Setup hint
This moves the picture around the screen in small amounts, at set
intervals, to reduce the panel image retention. This is where station-
ary objects, such as screen logos, leave a slight image visible after
they should have disappeared.
This is used to reduce the panel image retention that can occur with
stationary pictures by the white field signal. Select On (continuous
operation) or 60 Min. (time limit operation) and press the OK button.
Press the MENU or RETURN button on the remote control to return to
normal viewing.
This turns the gray sidebars to the black sidebars when watching
normal mode screen size area. It is always set to Off when the monitor
powered On. It is recommended to set to Off to reduce the panel
image retention. This is not available for the photo input function.
This is used to reduce power consumption for video input when there
is no video signal. Setting it On will lead the monitor to the standby
mode when the AV input with no signal is selected.
This selects the display condition of the FREEZE mode between Split
(2 pictures) and Strobe (12 pictures). This is grayed out and not
available in the AV monitor.
This selects the screen display size of TV input that appears first
when the main power turned on. This is grayed out and not available
in the AV monitor.
This function is to suppress the contrast of the screen regardless of the
Contrast setting in the Picture Menu. By this control, power consumption
can be reduced or degradation of a panel can be mitigated. The order
of power consumption is Extend 2 < Extend 1 < Normal.
If the Contrast setting is changed when this item is set to Extend 1 or
2, it will be changed to Normal automatically.
This is used to reduce the panel image retention which is caused by
especially displaying TV station logo.
Brightness of 4 corners of the panel get lower than the center.
This is used to display images at set intervals during slide show.
(37/42 only)
The original factory settings for the items of this Menu page can be
restored by pressing the OK button.
On 60Min.
(off the function) (waiting to reset)
Screen Saver
Screen Wipe
Black Side Panel
Video Power Save
Freeze Mode
Default Zoom
Panel Life
Luminance Manager
Slide Interval
Reset
Off On
This can display the Input Signal Screen Display every time the input
mode and signal mode are changed.
Set to OFF if the Input Signal Screen Display is not needed when
switching signals.
Mode Display
1 2 3 4
7 6 5
Off 15Min. 30Min.
120Min. 60Min.
2.2 2.8
Assigns ID numbers to the monitors so that they can be controlled
individually (up to 7 monitors can be controlled).
ID Number
This function can change each level if RGB signal invert to reduce
the panel image retention. When this function is required to use,
select On (continuous operation) or 60Min. (time limit operation) and
press OK button. And press the Menu or return button to exit.
On 60Min. Inverse
This function is also provided against the image retention. If time is
set for this item, the screen changes into the white pattern when the
monitor enters power save mode, and it will continue for the period of
setting time.
Standby White
Normally set to 2.2. Gamma
AV monitor only
OPERATING INSTRUCTIONS (continued)