Hitachi 42PD7800 - Manual (Page 11)

11
ENGLISH
Dynamic Natural Cinema
Movie Music
Favorite Speech
PICTURE MODE
You may recall the picture mode by
pressing this button. Each time pressed,
picture mode is changed in following
sequence.
INPUT SELECT
Press this button to change input
mode.
DVD CONTROL
You can use these buttons to operate
the selected brand of DVD player.
PROGRAM SELECT
Press these buttons to select a TV
program directly.
SOUND MODE
You may recall the sound mode by pressing
this button. Each time pressed, sound mode
is changed in following sequence.
FUNCTION SELECT
Press this button to indicate function
mode with a lamp.
MULTI MODE
In multi-picture mode, pressing this
button will change the multi-picture
mode.
CH I/II
This button is for A2 / NICAM
models only.
MULTI PICTURE
Press this button to change the
screen to multi-pictures. Press it
again to return to normal picture.
PHOTO INPUT (37/42 only)
Press this button to display the
pictures from digital camera and USB
card reader.
SWIVEL
Press this button to rotate TV. Use
cursor key ( ) to select the degree
of rotation.
MUTE
Press this button to turn off the set
sound. When press again or the
volume up button, the audio will be
restored.
FREEZE/RETURN
Press this button to change the
picture to freeze mode. Press it again
to return to normal picture.
ZOOM
Press this button can change Picture size.
RECALL (TV)
With this button, the display change
between “--”,“---”,“-” and AV00 on the
top right hand corner of the screen.
“--” is for 2 digit channel selection, “---”
is for 3 digit channel selection and “-” is
for 1 digit channel selection.
RECALL (Video/RGB)
Press this button to display input signal.
TIME (TV)
Pressing this button can indicate the
time by On-Screen display when
receiving a TV program on the screen
including TELETEXT service with the
time information.
*2
*1
DVD and SAT
*1 FUNCTION SELECT button
This remote controls has functions to control DVD player, DVD recorder, and STB for certain makers, besides this set.
Press
button to operate those equipments.
Each time pressed, LED lamps (TV, DVD, SAT) left to button lights to indicate the selection.
For details, refer to
*2 LED
LED lamps of DVD and SAT have 2 conditions (lighting or blinking).
Lighting: Indicate that the corresponding button becomes DVD (STB) mode.
Change to STB (TV) mode when press the button during LED lighting.
Blinking: Indicate that DVD or STB makers can be set up.
Set up makers/types for DVD or STB during LED blinking (30 sec). For details, refer to
If press the button on the remote control after LED light is off, LED light becomes on the corresponding code.
Remote control (continued)
COMPONENT NAMES (continued)
48
48