Hoover S1349 - Manual (Page 9)

Deluxe power
nozzle
Handle positions
The handle has two positions when
used with the power nozzle:
upright and operating.
To lower handle to operating
position, place your foot firmly on
the power nozzle and pull handle
back.
Carpet or rug
cleaning
When using the power nozzle for
carpet and rug cleaning, push the
floor surface selector button toward
“RUG”. This setting provides the
suction and agitator action neces-
sary to deep clean carpets. The
nozzle adjusts automatically to
various carpet pile heights.
Hard surface floor
cleaning
The power nozzle can be used for
cleaning hard surface floors such
as wood, linoleum, vinyl, asphalt
and rubber tile, sealed cork,
concrete and terrazzo, as well as
carpet.
To set the power nozzle for hard
surface floor cleaning, push the
floor surface selector button toward
“BARE”. This setting provides
suction and no agitator action. If
you prefer, you may use the wall/
floor brush to clean bare floors.
You will find it particularly
ient when cleaning lightweight area
rugs to set the floor surface selector
button on “BARE” and continue
cleaning the surrounding floor
surfaces.
Note: The headlight will be on in
both the “RUG” and “BARE” floor
surface modes.