Hoover S1349 - Manual (Page 6)

Questions or Concerns?
The Hoover Company wants to quickly resolve any concerns about your
cleaner or questions regarding its use. Look on the list provided with the
product for your local Hoover Factory Service Center or in the Yellow
Pages under “Vacuum Cleaners Household” for the nearest Authorized
Hoover Warranty Service Dealer (Depot) or call:
l-800-944-9200 for an automated referral of
authorized service outlet locations (U.S. only)
OR
l-330-499-9499 to speak with a representative in the
Hoover Consumer Response Center.
DO NOT RETURN THIS PRODUCT TO THE STORE OR SEND IT TO
NORTH CANTON FOR SERVICE.
How to
assemble
Connect hose
With hose toward front of cleaner,
push hose connector into opening
in bag lid.
When hose is attached properly,
hose cord plug will reach to
receptacle on cleaner.
Insert plug as deeply into the
receptacle as possible. Latch leg
will automatically fasten. Cleaner
will not operate unless plug is
inserted receptacle.
To disconnect hose, first remove
hose cord plug from receptacle
while pulling out on latch leg. Then,
depress buttons on hose connector
and pull up.
Note: The flexible hose contains
electrical wires for connection to
the power nozzle and should not
be used if damaged. The wires
should not be seen through the
outer skin.
5