Hoover S1349 - Manual (Page 14)

Clearing obstruc-
tions
To check for obstructions, first
turn cleaner off and disconnect
from electrical outlet; then
disconnect power nozzle plug
and wands from hand grip.
Plug cleaner in, turn on, and
check hose end for suction.
Remove any obstructions.
Remove power nozzle from
wands and attach wands to
hose. Check for suction and
remove any obstructions.
Before attaching power nozzle to
wands, check nozzle connector.
Push nozzle connector down to
lowest position. Look into nozzle
connector and remove any obstruc-
tions.
The bag
l
NOZZLE
When to replace
Check the bag when the “CHECK BAG” indicator shows red. When bag is
filled with dirt, the cleaner will not operate efficiently. Discard used bag.
CAUTION: Very fine materials, such as face powder, cornstarch,
fireplace ashes or fireplace soot, may seal the paper bag and may
cause it to burst even though it is only partially full of dirt. When the
cleaner is used to remove material of this nature, change the bag often.
What to buy
In order to maintain the original cleaning effectiveness and superior filtration
qualities of your cleaner, use only Genuine HOOVER@ Micro Filtration
Type S disposable bags.
Regular HOOVER@ Type S disposable bags also fit your cleaner and will
give satisfactory performance.
To assure that your HOOVER cleaner operates at
peak performance, it is imperative that you use
only genuine HOOVER paper bags made by The
Hoover Company. HOOVER bags can be
identified by these
13