Hoover S1349 - Manual (Page 5)

Operate cleaner only at voltage specified on data plate on bottom of
cleaner.
1. Combination carpet and floor power nozzle: automatically adjusts to
different carpet pile heights.
2. Headlight
3. Spring latch: locks extension wands together or locks wand to nozzle
or tool.
4. Wand storage clip: place cleaner on end and hook clip on bottom of
cleaner (page 11).
5. Extension wands: used with rug and floor nozzle. One or both wands
may be used with cleaning tools.
6. Wand/tool latch: used to lock hand grip to extension wands or
cleaning tools.
7. Floor surface selector button: push button toward “RUG” for carpet
cleaning or “BARE” for hard surface floor cleaning.
8. Hand grip
9. Remote ON/OFF switch*:
located on the hand grip for convenient
cleaner operation.
10. Remote variable speed control*: allows user to manually select
cleaner speed at the hand grip.
11. Receptacle: connect power nozzle cord underneath hand grip.
12. Dusting brush
13. Crevice tool
14. Wall/floor brush
15. Furniture nozzle
16. Power ON light*:
glows when cleaner can be controlled at the hand
grip.
17. Suction regulator: close for maximum suction, open if power nozzle is
difficult to push or lightweight rugs or draperies are being cleaned.
18. Large wheels: provide easy towing when cleaner is pulled over
carpet, area rugs and door sills.
19. Cord rewind pedal: step on pedal to rewind cord for storage. Hold
plug until cord is rewound.
20. Micro filter: aids in filtration of dirt particles.
21. Tool lid: pull up on edge of lid in recessed area.
22. Bag lid latch: lift to open bag lid.
23. ON/OFF pedal: conveniently located on top of cleaner.
24. Check bag indicator: shows red when paper bag should be checked
for fullness.
25. Hose connector
26. Receptacle:
connect power nozzle cord to canister cleaner.
27. Carrying handle
Belt check window: motor pulley will be visible in window if belt is
broken.
*Available on some models.
This cleaner is intended for household use.
4