Hoover S1349 - Manual (Page 19)

The agitator
When to replace
Disconnect cleaner from electri-
cal outlet.
When agitator brushes are worn,
the agitator should be replaced.
To check condition of brushes,
move edge of a card across bottom
plate while turning agitator. To
maintain cleaning effectiveness,
replace agitator if brushes do not
touch card.
What to buy
The agitator may be replaced with
either a single or double row of
brushes.
Single row of brushes Hoover part
No.
Double row of brushes Hoover
part No. 48414-049.
How to replace
Disconnect cleaner from electri-
cal outlet.
1. Remove nozzle cover, agitator
and belt as shown in “How to
replace belt.“
2. Discard old agitator.
3. Replace new agitator and belt
as shown in steps 4-6 of “How to
replace belt”.