Hoover S1349 - Manual (Page 8)

How to use
CORD REWIND I
To reduce the risk of electric shock, this appliance has a polarized plug (one
blade is wider than the other). This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to install the proper outlet. Do not change
the plug in any way.
ON-OFF switches
After assembling cleaner, plug cord
into electrical outlet. Turn cleaner
on by depressing ON-OFF pedal.
To turn cleaner off, depress pedal
again.
On some models two switches are
used to turn the cleaner on for
operation.
Press remote control switch on hand
grip to the “OFF” position before
plugging cord into electrical outlet.
Plug cord into an electrical outlet and
step on ON-OFF pedal. The POWER
ON light will glow, indicating that the
cleaner can then be controlled at the
hand grip. Press hand grip switch to
the ON position.
Check bag
indicator
The indicator will begin to show red
as bag fills with dirt. There are three
conditions that will cause the
indicator to become completely red:
1. The bag is full; change the bag.
2. Very fine materials (such as
powder) have been picked up,
clogging the bag pores; change the
bag, even if it is not full.
3. There is an obstruction in the
nozzle, hose, tools, or at the bag
opening; remove the obstruction.
INDICATOR
I
7