System, 1 status, 2 signal detection – Humax COMBO-9000 User Manual
Page 64: 3 common interface
GB63
User’s Manual
8. System
8.1 Status
You can view system information.
1. Press
the
MENU button.
2. Select
System using the / button and press the OK or
button.
3. Select
Status using the / button and press the OK or
button.
Note:
DTT version in the status menu may be requested
when contacting the call center.
8.2 Signal Detection
You can view the signal strength and signal quality of the channel that is currently on AV.
1. Press
the
MENU button.
2. Select
System using the / button and press the OK or button.
3. Select
Signal Detection using the / button and press the OK or button.
8.3 Common Interface
You can view the current status of the CI-Module.
1. Press
the
MENU button.
2. Select
System using the / button and press the OK or button.
3. Select
Common Interface using the / button and press the OK or button.
Note:
The displayed information about a Common Interface may diff er depending on Common
Interface type.