Humax COMBO-9000 - Manual (Page 54)

7. Installation
GB53
User’s Manual
2. Antenna Setting (Motor Antenna)
When using a motor antenna, press the OPT+ button in antenna setting menu.
Motor Type
1. Select Motor Type using the / button and press the
OK or button.
2. Select LNB Frequency using the / button and press
the OK or button to select an option. If the required
value does not exist, select User Defi ne and enter the LNB
frequency directly using the NUMERIC(0-9) buttons.
3. Select Motor Kind using the / button and press the OK
or button to select an option.
DiSEqC1.2 General motor antenna using DiSEqC1.2
USALS Motor antenna using USALS
Note: When Motor Kind is set as DiSEqC 1.2, both My Longitude and My Latitude are set to Disabled.
4. Select My Longitude using the / button and press the OK or button. Enter my longitude value
using the NUMERIC(0-9) buttons. Select from East/West using the / button and press the OK
button to complete.
5. Select My Latitude using the / button and press the OK or button. Enter my latitude value using
the NUMERIC(0-9) buttons. Select from North/South using the / button and press the OK button
to complete.
Edit Satellite Data
1. Select Edit Satellite Data using the / button and press
the OK or button.
2. Select Satellite using the / button and press the
OK or button. Select a satellite to edit using the OK or
button.
3. Select Satellite Alternative using the / button and
press the OK or button to add the satellite you set.
4. Select Satellite Longitude using the / button and press
the OK or button. Enter my longitude value using the
NUMERIC(0-9) buttons. Select from East/West using the
/ button and press the OK button to complete.
5. Select Save using the / button and press the OK button.
Note: Satellite Longitude is editable for User Defi ne Satellite only.