Humax COMBO-9000 - Manual (Page 50)

GB49
User’s Manual
7. Installation
7.1 Terrestrial Channel Search
Tip:
•
The default password is 0000.
• If you have forgotten your password, please contact your local product distributor.
You can search the terrestrial channels.
1. Press the MENU button.
2. Select Installation using the / button and press the OK
or button.
3. Select Terrestrial Channel Search using the / button
and press the OK or button.
1. Automatic Search
If your product is connected to the aerial and television, you can automatically search channels without
entering any other information.
1. Select Automatic Search using the / button and press
the OK or button.
2. Wait while channel search continues. This may take a few
minutes.
3. While operating search, the cursor is located at Stop.
Therefore, if you press the OK button during searching, the
operation is stopped and the channels found until then will
be displayed.
4. If search operation is successfully completed and the
channel does not exist, press the OK button and try to reset
the search operation again if necessary.
5. You can delete unnecessary channels from the searched channels. Select the channels to delete and
press the OK button. Then select Delete and press the OK button. To delete all channels, select Select
All to select all channels, select Delete and press the OK button.
6. When completing channel search and deleting unnecessary channels, select Save and press the OK
button to save the changes.