Humax COMBO-9000 - Manual (Page 57)

GB56
User’s Manual
7. Installation
3. Automatic Search
If the product is connected to the antenna and TV, you can automatically search satellites and channels
without entering any other information.
1. Select Automatic Search using the / button and press
the OK or button.
2. Select Satellite using the / button and press the OK or
button to select the satellite.
3. Select Search Type using the / button and press the OK
or button. Select an option among All, FTA and CAS and
press the OK or button.
All Searches all channels.
FTA Searches only free channels.
CAS Searches channels for selected CAS.
4. Select Channel Type using the / button and press the OK or button. Select an option among All,
TV and Radio and press the OK or button.
5. Select Search using the / button and press the OK button. Channel search will activate. Select
Select All/ Unselect All using the / button and press the OK button to select/unselect all channels.
Select a channel using the / button and press the OK button. Select Delete and press the OK
button. To save search results, select Save and press the OK button.
Note:
• When you select Stop during channel search, the search will be discontinued and the accumulated
search results will show.
• If there are no channels available, a message indicating the result will pop up.