Humax COMBO-9000 - Manual (Page 58)

7. Installation
GB57
User’s Manual
4. Manual Search
1. Select Manual Search using the / button and press the
OK or button.
2. Select Satellite using the / button and press the OK or
button to select the satellite.
3. Select Transponder using the / button and press
the OK or button. Select a transponder using the
/ button and press the OK or button. To add
another transponder, select User Defi ne from the list.
Add transponder screen will appear. Enter the values for
Frequency, Polarization, Symbol Rate and FEC. Select
Done and press the OK button to complete.
4. Select Network Search using the / button and press the OK or button to select Enable/Disable.
5. Select Search Type using the / button and press the OK or button.
Select an option among All, FTA and CAS and press the OK or button.
6. Select Channel Type using the / button and press the OK or button.
Select an option among All, TV and Radio and press the OK or button.
7. Select Search using the / button and press the OK button. Channel search will activate.
5. Other Search
1. Select Other Search using the / button and press the
OK or button.
2. Select Advanced Search using the / button and
press the OK or button. Enter the values for Satellite,
Transponder, Video PID, Audio PID and PCR PID. Select
Search using the / button and press the OK button.
Channel search will activate.
3. Select SMATV Search using the / button and press
the OK or button. Enter the values for Frequency,
Polarization, Symbol Rate and FEC. Select Search using
the / button and press the OK button. Channel search
will activate.
4. Select Multiple Manual Search using the / button and press the OK or button. Enter the values
for Satellite, Edit TP List, Search Type and Channel Type. Select Search using the / button and
press the OK button. Channel search will activate.
Note: You can edit transponders in the Edit TP List.