Epson 8100i - Manual (Page 68)

62 Fine-tuning the Projector
3. When the menu you want is highlighted, press the Enter button
to select it.
The highlight moves to the first option for that menu.
4. Press the up or down arrows (control panel) or up or down on the
Enter button (remote control) to scroll through the options.
5. Press either the left or right arrow buttons (control panel) or right
or left on the Enter button (remote control) to change a setting
on one of the submenus.
6. If you want to go back to the default settings on any menu, select
Reset , press Enter , select Yes , and then press Enter .
7. Press the Esc button to go back to the main menu. Your changes
are saved automatically.
8. Press the Menu button to exit the menu system.
The options available in each of the menus are described below.
note
Some options are limited to
being enabled (turned on) or
disabled (turned off).
Enabled options are
indicated by a green light.
Disabled options are blank
.