Epson 8100i - Manual (Page 37)

Setting Up the Projector 31
Connecting the Mouse and Serial Cables
To use the remote control as a mouse or use the EMP Link V
software, follow the steps below. This illustration shows the
connections you’ll be making:
1. Connect the round end of the main cable to the projector’s
Mouse/Com port, as shown.
2. To use the remote control as a wireless mouse, connect one end of
the projector’s Mac mouse or USB cable to the MOUSE terminal
on the square end of the main cable.
3. Connect the other end of the Mac mouse or USB cable to the
mouse or USB port on the back of the PowerBook.
Mac serial cable
Mac mouse or
USB cable
Mouse/Com port
main cable