Epson 8100i - Manual (Page 42)

36 Setting Up the Projector
Connecting RCA Cables
Before starting, make sure the projector and your VCR or other video
source are turned off.
1. Connect the yellow RCA plug on one end of the RCA video cable
to the projector’s Video port. Connect the other end of the cable
to the video-out port of your video source.
2. If you’ll be using audio, connect the RCA audio cable to the left
and right Audio ports of the projector (insert the white plug into
the
L port and the red plug into the R port). Connect the plugs at
the other end of the cable to the audio output ports of the video
source.
RCA audio cable
RCA video cable