Enterasys Networks 802.1Q - Manual (Page 57)

Quick VLAN Walkthrough
VLAN Configuration 3-35
13. Use the arrow keys to highlight the Port Mode field for port 10. Use the SPACE bar or
BACKSPACE key to step sequentially through the possible settings of the port until 1Q
TRUNK is displayed.
14. Use the arrow keys to highlight the SAVE command at the bottom of the screen. Press ENTER.
Port 10 is now acting as a 1Q Trunk port and every VLAN is in its Port VLAN List. The frame
format for every VLAN is also set to tagged. The screen should now look like
Figure 3-13 .
Figure 3-13 Walkthrough Stage Three
Now that the TEST VLAN and the 1Q Trunk connection are set up, we can proceed to activate the
TEST VLAN.
15. On the 802.1Q VLAN Main Menu screen, use the arrow keys to highlight the DEVICE VLAN
CONFIGURATION menu item. Press ENTER. The Device VLAN Configuration screen,
Figure 3-14 , displays.
Firmware Revision: XX.XX.XX
Port Assignment Configuration
25991-11
Module Type: xxxxx-xx
BOOTPROM Revision: XX.XX.XX
6C105 LOCAL MANAGEMENT
Slot Number: xx
RETURN EXIT
Port
1
2
3
4
5
6
7
8
9
10
11
12
Port Mode
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[1Q TRUNK]
[HYBRID]
[HYBRID]
VLAN Name
DEFAULT VLAN
DEFAULT VLAN
TEST VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
SAVE PREVIOUS NEXT
VLAN ID
[0001]
[0001]
[0002]
[0001]
[0001]
[0001]
[0001]
[0001]
[0001]
[0001]
[0001]
[0001]