Enterasys Networks 802.1Q - Manual (Page 40)

Port Filtering Configuration Screen
3-18 VLAN Configuration
Screen Example
Figure 3-7 Port Filtering Configuration Screen
Field Definitions
Table 3-4 Port Filtering Configuration Screen Field Definitions
Use this field … To …
VLAN ID (Read-Only) See the VLAN ID of the VLANs that are configured to have their
frames transmitted out the port selected in the Port # field.
VLAN Name
(Read-Only) See the names of the VLANs associated with the VLAN ID. If a
VLAN does not have a name, “Not Defined” is displayed.
Port
(Selectable) To step to the port number of the interface being configured
including the selection of ALL ports.
Firmware Revision: XX.XX.XX
Port Filtering Configuration
25992-07
Module Type: xxxxx-xx
BOOTPROM Revision: XX.XX.XX
6C105 LOCAL MANAGEMENT
Slot Number: xx
RETURN EXIT
Filter Using VLAN Lists: [NO]
Filter All Untagged Frames: [NO]
VLAN ID
0001
0003
0004
0012
0014
0020 VLAN Name
Default VLAN
Not Defined
Not Defined
Not Defined
Not Defined
Not Defined
SAVE PREVIOUS NEXT
Port: [002]
Port VLAN List