EverFocus HDCCTV 12X IP66 SPEED DOME EPH5212 - Manual (Page 23)

23
Issue: 1.0
increasing the brightness of the overall screen so that subjects being shot with a loss of dark detail due to backlight will
have just the right brightness level.
- Enter into {Main Manu}
- Select {Camera Setup} and move to {AE Setup} using joystick [ ▶ ].
- Set AE mode for Full Auto, Manual, Shutter PRI.
- Press [Open] button or use joystick to save settings.
- Press [Close] button or use joystick to return to previous menu (Back).
AE Mode Full Auto Manual SHUT PRI
Shutter
(Auto, X2~X64,1/30~1/10000)
X O (Auto) O (Auto)
AGC Gain(OFF, Low/Mid/High) X O (High) X
DSS(OFF, X2~X64) O (Off) X X
Bright(0~100) O (50) O(050) O (50)
3.5.4 Day & Night Setup
The Day & Night function improves the camera’s sensitivity at night or when the brightness level of the ambient
environment. According to the luminance level, Day & Night filter is automatically switched.
- Enter into {Main Manu}
- Select {Camera Setup} and move to {Day/Night Setup} using joystick [ ▶ ].
- Set Day/Night for Auto, Day or Night.
- Set D&N Detector for Sensor or Video.
- Set switching time that you want. Default value is 5 second.
- Press [Open] button or use joystick to save settings.
- Press [Close] button or use joystick to return to previous menu (Back).
3.5.5 Advanced Setup